English
Español
For the plastic dog cage mould, the most important thing is to design the product structure and the mould feeding and ejecting structure.
The dog cage mould designed by Kelong usually uses a hot runner for the dispensing port, which can greatly reduce the time for manual trimming of the glue port. In terms of the appearance and structure of the product, Kelong will also propose its plan to help customers optimize the structure and save costs as much as possible.
(1) Requirements in terms of structure and action. The plastic dog cage mould should be compact in structure and require high reliability in action. If it is a lateral typing structure, the typing reset time should be able to be flexibly adjusted.
(2) The hot runner feeding can also reduce the return material, improve the quality of raw materials, and improve the utilization rate of materials.
(3) Excellent cooling water effect design can reduce the cooling time of the dog cage mould, thereby shortening its moulding cycle. It needs a design approach to reduce the overall cost of tooling and production.
.jpg?imageView2/2/format/jp2 "Daily Storage Basket Mould (Large)")
.jpg?imageView2/2/format/jp2 "Storage Basket Mould (Small)")
